Apparel and Decals

[BigDiezel]

Just wondering if you guys had made anything like t-shirts, hoodies , decals , license plates !!! I would like to Show it off at and upcoming event !! Let us know ! Thanks BigDeiZel

[tex25025]

Just wondering if you guys had made anything like t-shirts, hoodies , decals , license plates !!! I would like to Show it off at and upcoming event !! Let us know ! Thanks BigDeiZel

They have decals that I know. I did get a custom badge to replace the door badges(powerstroke v8 badge) that I should be getting in tomorrow, I can try to post a picture over the weekend. Matt did like the rendering that the badge guy did before he took it to the mill shop. Other then the decals I don't know if they have anything as of yet, but I could be wrong about that.

[Pahrump]

I am hoping to have me some supapimp stickers here soon

[BigDiezel]

I was just wondering ? Do they give you a pair of decals when you get the DD tuner ? I will be ordering mine next week !!! I got my exhaust and intake already !

[OOWeaver68]

I was just wondering ? Do they give you a pair of decals when you get the DD tuner ? I will be ordering mine next week !!! I got my exhaust and intake already !

nope, no decals with the dash daq, or maybe i just got screwed...

[Blaster7Romeo]

screw the deals I just want a 6.0 tuner ....... And then i will take a decal.

[mick1955]

If they get a decal, I had better get one. If you run short, send me OOWeaver68, he's just a kid and doesn't need one anyway!!!

[OOWeaver68]

If they get a decal, I had better get one. If you run short, send me OOWeaver68, he's just a kid and doesn't need one anyway!!!

wtf!!, how does this work out? lol

[BigIslandBoy]

I want a decal. I didn't know they were available.

[Moyerboy]

see if you can get permision from the nuttyprofessor and get a graphics place to make some up.

[PSD64Liter40]

I have the capabilities of screen printing some stickers.

[Moyerboy]

sweet id buy acouple if you got approved and wanted to sell some

[o2shootthej]

I have the capabilities of screen printing some stickers.

can you do the window stickers that'll peel right back off? if so i'll take a few

[Pahrump]

Like this.........sory for the bad pic...I was facing the sun....too bad MATT wont get me some nice stickers!!! And a hair bigger....lol
http://i19.photobucket.com/albums/b199/PahrumpYFZ/DSC_1043.jpg

[Moyerboy]

nice im up for some of those decals were cna i get one

[mick1955]

Pahrump - Nice sticker, but needs to be a lot bigger!!!

[OOWeaver68]

whered you get that, i want some!!!!

[Pahrump]

Pahrump - Nice sticker, but needs to be a lot bigger!!!

No doubt.....I have talked to matt and talked to matt.....he said my trucks too slow to have a bigger sticker on it

[Pahrump]

whered you get that, i want some!!!!

Special.......

[OOWeaver68]

Special.......

oh you have to be special ed...ok, well i guess i really dont need one:D

[BigDiezel]

I want a couple stickers also !!! haha, I have been waiting for them to come out with a license plate i can put in the front !!! haha , Got my local ford dealer bezel still bolted on with no plate in it ? Thought about sticking the Ol' RBP one there cause thats the only one i can find that looks half decent.

[mick1955]

I think we should ask Matt if it's ok if John (PSD64Liter40) makes some. Hell I would be willing to pay if they turn out looking good, and since John did such an outstanding job on the Spartan theme why not have him make some decals!!!! Hell, he's a young kid and doesn't have anything better to do with his time. Right John!!!!! Would love to have some that could be removed easily, like the magnetic one's. At this point I would take anything.....

[Moyerboy]

yeha but magnetic decals can be stolen adn we dont wnat that unless they are for a trailer or tailgate that you couldnt help but notice someone take keep me poted on the decals tho i want some

[PSD64Liter40]

I think we should ask Matt if it's ok if John (PSD64Liter40) makes some. Hell I would be willing to pay if they turn out looking good, and since John did such an outstanding job on the Spartan theme why not have him make some decals!!!! Hell, he's a young kid and doesn't have anything better to do with his time. Right John!!!!! Would love to have some that could be removed easily, like the magnetic one's. At this point I would take anything.....

Get ahold of Matt and find out im game! I am going to be revamping the website after New Years as well!!! I may be young but I am still older than Matt! LOL!

[mick1955]

Get ahold of Matt and find out im game! I am going to be revamping the website after New Years as well!!! I may be young but I am still older than Matt! LOL!

Well that all sounds great, but doesn't seem to help us with the sticker problem we are all having. I don't need anything bigger than a 2' x 2'. I think you should make some, and being the real, real, real nice guy that you are you should pass them along to us!!!:D

[Pahrump]

2x2 is a funky size for the spartn logo, and name...something about 1.2-2" tall and 6-8" long..di cut would be the ticket...almost like the one I have but a hair bigger..and die cut.

[mick1955]

2x2 is a funky size for the spartn logo, and name...something about 1.2-2" tall and 6-8" long..di cut would be the ticket...almost like the one I have but a hair bigger..and die cut.

Funky size my butt!:D I want something that all these idiots can see when I pass them!!!! Of course that's when I'm not driving like an old man....

[sledneck57]

when would that be.

[mick1955]

when would that be.

Some of the time!!! Will see when I go up your way and chain your truck to a tree.. By that time I should have a Spartan poster on the back of my truck, as big as the tailgate.:D

[PSD64Liter40]

Ok, so I called around today and got some pricing, cheapest I have found for full color and being die cut were around $3.50 a piece and that was at 8" wide and proportional in height. I would be willing to sell them @ $4.00 including shipping if you want more than one then $3.50 for each additional. This is the cheapest I can do it and not loose money.

[PSD64Liter40]

The pricing is VERY dependant on the size of the orders I put in as well if I order 20 thats what they cost, so I will more than likely take pre-orders on them. Now I just need approval from Matt!

[OOWeaver68]

ill preorder a couple!!! thanks

[Pahrump]

I am down...I would bet if you order 100...or 1000 then they would be much less...and I dont see a problem getting rid of them....$4+42 cents shipping...say $5 shipped for a sticker...I bet everyone on all the forums would buy one...I will take 2...maybe 3 of them. Check pricing on a larger order...I can go in with you on buying them if you want..I am down for a few bucks investment. I can send you PayPal

[mick1955]

Ok, so I called around today and got some pricing, cheapest I have found for full color and being die cut were around $3.50 a piece and that was at 8" wide and proportional in height. I would be willing to sell them @ $4.00 including shipping if you want more than one then $3.50 for each additional. This is the cheapest I can do it and not loose money.

It's ok with me if you loose money.:D Not!!! Anyway need more info. Will it be permanent, or??? I would really like something I could remove, but if I can't I will put it inside the window on something that I can remove. That way if I have to take it to a dealer that is not mod friendly I can remove it. You can count me in on 2 of them. Just tell Matt that they will look as good as the theme you made... Hell, better yet tell him he can pay for them, and put that 1000 tune on as the Christmas special!!!!

[nordberg]

i'll take 2!

[Pahrump]

It's ok with me if you loose money.:D Not!!! Anyway need more info. Will it be permanent, or??? I would really like something I could remove, but if I can't I will put it inside the window on something that I can remove. That way if I have to take it to a dealer that is not mod friendly I can remove it. You can count me in on 2 of them. Just tell Matt that they will look as good as the theme you made... Hell, better yet tell him he can pay for them, and put that 1000 tune on as the Christmas special!!!!

Buy you a few...that way if you have to take the truck in you can remove the sticker.

But the one I have dont say anything about tuning...just SPARTAN diesel tech...hell no one knows what Spartan is anyhow..its not like you have an Edge sticker on the truck where everyone knows that if it sayd edge that your tranny is toast

[mick1955]

Buy you a few...that way if you have to take the truck in you can remove the sticker.

But the one I have dont say anything about tuning...just SPARTAN diesel tech...hell no one knows what Spartan is anyhow..its not like you have an Edge sticker on the truck where everyone knows that if it sayd edge that your tranny is toast

I like that one! its not like you have an Edge sticker on the truck where everyone knows that if it says edge that your tranny is toast They need to say something about custom tuning, but it really doesn't matter as long as it has Spartan on it...

[Pahrump]

I personally think the pic at the top of the screen is tits....just the LOGO, and SPARTAN DIESEL TECHNOLOGIES

[mick1955]

I personally think the pic at the top of the screen is tits....just the LOGO, and SPARTAN DIESEL TECHNOLOGIES

That good with me...

[PSD64Liter40]

That good with me...

I am in I just need aproval from Matt and I will get an order together, can anyone get a definite answer? I will make up a few prototypes at work tomorrow and post 'em up if I find some spare time. Selling these Spartan tuners is wearing me out at work!!!

[nordberg]

when you get it all approve pm me an address and ill mail you cash or check or something.

[gahanna-6.4]

http://www.maharafghans.com/5th.jpg

[Pahrump]

Too graphical for a single layer diecut sticker.

[nordberg]

what he said^^

[mick1955]

I like it! Looks very nice...

[gahanna-6.4]

Yah, thats web graphics stuff... not for stickers. It needs to almost be a 'negative' of that for a cut sticker.

[PSD64Liter40]

a 2ft wide with proportional height is gonna be about $25 the print shop finally got back with me today on that, so still just waiting on a response from Matt and/or Nutty regarding the decals.

[OOWeaver68]

ill take one of those to

[Pahrump]

If you have a sliding window go measure that...I want one that fits perfectly in the center section as far as width goes....I am too lazy to go measure mine right now. I would think that many prople would like that size too.

And a few might like em bigger...hell some might even want a windsheild banner...I know when I go to the Nats next year I want one that goes all the way across...and want Matt to pay all my entry fees...LMFAO

[OOWeaver68]

ill take what i can get, even if it dont go on my truck

[PowerstrokeFarms]

Yeah, I would definitely like one for the sliding window if we could get those!

[Glassman]

I'm in for a few

[Moyerboy]

when are the decals up for sale i have the money burning a hole in my back

[nordberg]

any idea on the stickers?

[Moyerboy]

havnt heard anything i have yet i have to get a chance to ask scott for permision to make the decals for my rig

[08stroker250]

I think a good sliding glass decal would be the Spartan helmet side view and underneath it say Spartan Diesel Tech/ Technologies.... just a thought for those wanting a bigger decal in the center of the back window... I would like it atleast lol

[BigKid]

Yep, I want a spartan sticker. I like the one that Pahrump has.

[08powerstroke22]

Im in for a couple, i like Pahrumps also!!

[Pahrump]

Yep, I want a spartan sticker. I like the one that Pahrump has.

I can probably get those made up.

I will ask Scott/Matt if its ok to get them done...I can get this done asap...I am working with a sticker/sign shop right now anyhow for signs/stickers for my local business.

[NuttyProfessor]

I can probably get those made up.

I will ask Scott/Matt if its ok to get them done...I can get this done asap...I am working with a sticker/sign shop right now anyhow for signs/stickers for my local business.


You can get them done as long as I get one!

[BigKid]

You can get them done as long as I get one!

Sweet!.............

[Pahrump]

Aight...thanks bro...thanks for the pm reply.

I will get on these next week with my sign people and I will get some prices out...I dont care to make any money on these..just cover the stickers and shipping.

I will update first of the week.

[Pahrump]

I got my sticker people working on them....hopefully ready by the end of the week...should be able to get them to you guys for about $4 shipped...they are supposed to get me a final price this evening.

They are going to look like the one on my truck, about 8"x3" and be die cut...should be real nice.

[OOWeaver68]

where you getting them made?

[JEEPSTER401]

Anyone have T-shirts with the design on them? I am game for a T-shirt.

[Pahrump]

where you getting them made?

One of those places....


I could do T-shirts as well, but I would need a commitment on them...have to do 10 min they would be about $19 each....if we did 25 they would be about $17 each, and 50 or more I think I could do them for about $15 each...shipping included.

I dont need to make any money off this but I dont need to sit on 50 spartan shirts either...lol

If you guys want them LMK...they would be nice Hanes shirts...with a logo on the chest, and a big logo on the back...could do them in say Black, Red, or White I guess.

I am having all my signs, stickers, shirts, and coozies made at this place for my ATV/MC store right now.

[Greenhorn Diesel]

One of those places....


I could do T-shirts as well, but I would need a commitment on them...have to do 10 min they would be about $19 each....if we did 25 they would be about $17 each, and 50 or more I think I could do them for about $15 each...shipping included.

I dont need to make any money off this but I dont need to sit on 50 spartan shirts either...lol

If you guys want them LMK...they would be nice Hanes shirts...with a logo on the chest, and a big logo on the back...could do them in say Black, Red, or White I guess.

I am having all my signs, stickers, shirts, and coozies made at this place for my ATV/MC store right now.


Put me down for 2..one white, one black, both XL

[OOWeaver68]

ill def take a couple stickers and a couple shirts, size fat ass (XXL) lol

i was wondering where you get them done, cause one of my buddies has stickers and wraps made for his truck and boat to show sponsorship and stuff, i was just curious

thanks

and i can pick any of my stuff up, instead of you paying the shipping, that way i get it cheaper too, right:D

[Pahrump]

Signature over off Dowlen...2 doors down from my new shop...Wicked Motorsports

[OOWeaver68]

Signature over off Dowlen...2 doors down from my new shop...Wicked Motorsports

new shop? do tell, do tell....

[Pahrump]

new shop? do tell, do tell....

Nothing to do with trucks...ATV/Dirtbike parts, accessories...and I will be selling pitbikes...pimp ones..and cheaper pitbikes and kids atv's.

I am pretty big into ATV's and race pitbikes myself.

[OOWeaver68]

Nothing to do with trucks...ATV/Dirtbike parts, accessories...and I will be selling pitbikes...pimp ones..and cheaper pitbikes and kids atv's.

I am pretty big into ATV's and race pitbikes myself.

sounds good, ill have to stop in some time, and ill try to send some business your way

[Pahrump]

sounds good, ill have to stop in some time, and ill try to send some business your way

Yeah please do...stop by and we can shoot the shit and drink a red bull or something.

[OOWeaver68]

Yeah please do...stop by and we can shoot the shit and drink a red bull or something.

ill have a "or something" and itll be jack and coke:D

where on dowlen is it?

[nordberg]

sign me up for 3 shirts and a sticker. 2 black 1 xl & 1L and 1 redXL. pm me the payment options. mail you a check or CC dont matter to me. i suppose i can do the whole paypal thing like i did for sean

[Pahrump]

OK guys I will get some shirts in the works...give me a week or so on them...stickers should be ready first of next week the girl told me.

I dont want to take payment for anything till its in hand, I will front the money for the stuff then take the payments.


Weaver...its RIGHT across the street from the big World Gym...theres a big WICKED MOTORSPORTS sign on the building, and my truck parked out front if I am there.

[nordberg]

i will be impatiently waiting. lol. maybe ill be really imapatient and by ansct sticker and shirt! lol

[nordberg]

double post

[Pahrump]

Talked to them just a bit ago.

T's should be ready in less than 2 weeks...maybe around 10 days....stickers first of the week.

The T's I am getting in RED, and in Black....they will have the Spartan Logo on the front with SPARTAN DIESEL TECHNOLOGIES like my stocker, but not the contact info..the back will have a bigger logo, just like the sticker on my truck...it will have the contact info and all for Spartan..should look good.

[nordberg]

awesome i love to promote.

[Glassman]

Pahrump;
Put me down for 1 BLK 2X and 1 Red 2X shirts with 2 decals.
Thanks for the effort!

[Jim Truett]

In for 1 red XXL shirt and two stickers

[BigKid]

I'm up for 2 XLs. 1 red, 1 black. And a Sticker for the FN3fiddy. :D

[Craig02711]

Scott -

I'm in for a large red t and 2 decals - if I can still get in on this. Let me know where to send the cabbage!

BTW, thanks for taking this on! We all appreciate it...

Cheers
Craig

[Pahrump]

I should have stickers today, shirts first of the week...I approved the final sticker yesterday and put one on my truck so they are cutting them today, and told me shirts were to be done Monday/tuesday

[nordberg]

any update?

[Pahrump]

I will check today, I am at the mercy of the place here guys, nothing I can do...I wish I would have had them 2 weeks ago for yall.

[nordberg]

not worried just checking. just let us know

[Pahrump]

Stickers are ready they just called me.

[gahanna-6.4]

Stickers are ready they just called me.What about T's? I want a couple.

[Pahrump]

I have a few...both colors...only a few left though

[gahanna-6.4]

Any L or XL in black?

[Pahrump]

Yup...both red and black in L and XL

[Blaster7Romeo]

If you ever get anymore stickers i would like one. If not than no big deal.