Gauge Temp Settings & TCM Relearn

[08stroker250]

Recommended Temp Settings

EGRTA – Pre Turbo EGT
High Limit- 2000
High Warning- 1600

EOT – Engine Oil Temp
High Limit- 300
High Warning- 230

ECT – Engine Coolant Temp
High Limit- 275
High Warning- 225

FRP – Fuel Rail Pressure
High Limit- 30000
High Warning- 30000
Low Warning- 0

FRT – Fuel Rail Temp
High Limit- 200
High Warning- 140

TFT – Transmission Fluid Temp
High Limit- 275
High Warning- 220


TCM Relearn Process

1.) From a stop, accelerate the vehicle to 55-60 mph at approximately 1/4 throttle. DO THIS TWICE.
2.) From a stop, accelerate the vehicle to 65-70 mph at approximately 1/2 throttle. DO THIS TWICE.
3.) From a stop, accelerate the vehicle to 70 mph at approximately 3/4 throttle. DO THIS TWICE.
4.) From a 40 mph roll, press the accelerator to the floorboard quickly (forcing the truck to downshift) and accelerate to around 75 mph.
5.) From a stop, acclerate to 75 mph at wide open throttle (press the accelator to the floor immediately). DO THIS 2-3 TIMES.

[08stroker250]

EDIT on the fuel rail pressure settings!